##contHeadInfo##
 Mi cuenta

Más en Registradores Anterior Siguiente

Registrador con Impres. Térmica

Registrador con Impres. Térmica 1 CANAL + 1 RELE ALARMA RS422/485 100/2,Communication (RS485, 422)

IVA no incluido



()

Model Code Information
RT9- Mini recorder 96(W) × 96(H) mm
Control type 0 Exclusive for recorder
1 Record and temperature control
Unit selection 0 (°C) Celsius(only)
1 Etc
Optional 0 None
1 Alarm output 1 contact (AL1)
2

Alarm output2 contact (AL1, AL2)

3 Communication (RS485)
4 Communication (RS485) / alarm 1 contact (AL1)
5 Communication (RS485) / alarm 2 contact (AL1, AL2)

Specification

Model RT9
W × H × D (mm) 96 × 96 × 100
Function
ㆍZOOM ㆍFree scale ㆍAlarms
ㆍPID-Auto Tuning ㆍMulti Input/Output ㆍRecorder/Temp.controller
Power voltage 100~240 V a.c (±10%), 50/60 ㎐
Corrent consumption Max 6.0 W, Max. 10 VA
Sampling cycle 250 ms
Input T.C : K, J, E, T, R, S, B, L, N, U, Wre 5 - 26, PL - II
R.T.D : Pt 100 Ω, KPt 100 Ω
Direct volltage : 1 ~ 5 V, 1 ~ 10 V, -10 ~ 20 mV, 0 ~ 100 mV(Free scale type)
Input display resolution Below decimal point of input signal and measaring range
Input impedance T.C and mV input : Min. 1 ㏁, d.c volt : 1 ㏁
Alarm Relay output(AL1, AL2)
Source tolerable resistance T.C : Max. 250 Ω, Voltage : Max. 2 ㏀
Lead wire tolerable resistance R.T.D : Max. 10 Ω / Wire (Notice : Indentical conductor resistance between 3wires)
Input tolerable voltage ±10 V (T.C, R.T.D, voltage :mV DC), ±20 V (voltage:V DC)
Noise removal rate NMRR(Normal mode): Min. 40dB , CMRR(Common mode):Min. 120 dB (50/60 Hz ±1 %)
Standard T.C / R.T.D (KS/IEC/DIN)
Standard junction temp·compensation tolerance ±1.5 ℃ (15 ~ 35 ℃), ±2.0 ℃(0 ~ 50 ℃)
Accuracy ±0.3 % (Full Scale)
Record
Measuring point : 1 point, Response time : Variable by recording time,
Record method : Thermal line, Printing : 203 dpi (8.0 dot/㎜) 384 dots/line
Record speed : 24 ㎜/h ~ 900 ㎜/h, Record paper : Width 57.5 ㎜ , Length 16 m
Runout of paper : P-END lamp on,Record is stoppe

Productos Relacionados

NUESTROS PRODUCTOS