Sensor fotoeléctrico
  • Sensor fotoeléctrico
  • Sensor fotoeléctrico (1)
  • Sensor fotoeléctrico (2)

Más en Sensores Fotoeléctricos Anterior Siguiente

Sensor fotoeléctrico

Sensor fotoeléctrico M18-M12

IVA no incluido

()

  • FEATURES
    Sensor/ detection principle Photoelectric retro-reflective sensor, Dual lens
    Housing design (light emission) Cylindrical
    Housing length 70.2 mm
    Thread diameter (housing) M18 x 1
    Optical axis Axial
    Sensing range max. 0.05 m ... 7 m 1)
    Sensing range 0.05 m ... 6 m 1)
    Type of light Visible red light
    Light source LED 2)
    Light spot size (distance) Ø 400 mm (6 m)
    Angle of dispersion Approx. 4.5°
    Wave length 645 nm
    Adjustment Potentiometer, 270° (Sensitivity)
    • 1) Reflector PL80A.
    • 2) Average service life: 100,000 h at TU = +25 °C.
  • MECHANICS/ELECTRONICS
    Supply voltage 10 V DC ... 30 V DC 1)
    Ripple ± 10 % 2)
    Power consumption 30 3)
    Switching output PNP 4)
    Switching mode Light/dark switching 4)
    Switching mode selector Selectable via L/D control cable
    Signal voltage PNP HIGH/LOW Approx. VS – 1.8 V / 0 V
    Output current Imax. ≤ 100 mA
    Response time ≤ 0.5 ms 5)
    Switching frequency 1,000 Hz 6)
    Connection type Male connector M12, 4-pin
    Circuit protection

    A 7)

    B 8)

    D 9)
    Protection class III
    Weight 47 g
    Polarisation filter ✔
    Housing material Metal, Nickel-plated brass and PC
    Optics material Plastic, PMMA
    Enclosure rating IP67
    Items supplied Reflector P250, fastening nuts (2 x)
    Ambient operating temperature –25 °C ... +55 °C
    Ambient storage temperature –40 °C ... +70 °C
    UL File No. NRKH2.E300503 & NRKH8.E300503
    • 1) Limit values when operated in short-circuit protected network: max. 8 A.
    • 2) May not exceed or fall below Uv tolerances.
    • 3) Without load.
    • 4) Control wire open: dark switching D.ON.
    • 5) Signal transit time with resistive load.
    • 6) With light/dark ratio 1:1.
    • 7) A = VS connections reverse-polarity protected.
    • 8) B = inputs and output reverse-polarity protected.
    • 9) D = outputs overcurrent and short-circuit protected.
  • SAFETY-RELATED PARAMETERS
    MTTFD 2,006 years
    DCavg 0%
  • CLASSIFICATIONS
    ECl@ss 5.0 27270902
    ECl@ss 5.1.4 27270902
    ECl@ss 6.0 27270902
    ECl@ss 6.2 27270902
    ECl@ss 7.0 27270902
    ECl@ss 8.0 27270902
    ECl@ss 8.1 27270902
    ECl@ss 9.0 27270902
    ETIM 5.0 EC002717
    ETIM 6.0 EC002717
    UNSPSC 16.0901 39121528



Manual 

Productos Relacionados

NUESTROS PRODUCTOS