Más en Sensores Inductivos Anterior Siguiente
Detector Inductivo VAC M12 2MM
IVA no incluido
()
| Switching distance | 2 mm |
| Mounting |  shielded |
| Switch type |  N.O. |
| Signal Type | AC |
| Connection |  Cable |
| Connection diagramm |
 |
| Dimension (in mm) | fine-pitch thread M12 x 70 |
|
Technical Specification |
|
| Operating voltage | 20 - 250 VAC |
| Voltage drop | 5 V |
| Max. load current | 300 mA |
| Leakage current | ≤ 2 mA |
| Switching frequency | 15 |
| Switching hysterese | ≤ 15 % |
| Operating temperature | -25 ° C to 70 ° C |
| Temperature drift | ≤ 10 % |
| Repeat accuracy | ≤ 5 % |
| Swiching state | LED |
| Digital output | |
| Short-circuit proof | yes |
| Overload protection | yes |
| Reverse voltage protection | yes |
| Protection category | IP67 |
| EMC-level | DIN EN 60947-5-2:2008 |
| Material active face | PCB |
| Termination | 2m PVC 3x0,5mm² |
Inductive sensor M12 shielded NO/NPN conn. M12
Inductive sensor M8 shielded NO/PNP cable 2m axial
Inductive sensor M5 Sn 0,8 mm NO/PNP cable 2m axial
Inductive sensor M18 short shielded NO/PNP conn. M12
Inductive sensor M12 shielded NO/PNP cable 2m axial
Inductive sensor M18 shielded NO/PNP conn. M12
Inductive sensor M12 shielded NO/PNP conn. M12
Inductive sensor M12 shielded NO/PNP cable 2m axial
Inductive sensor M12 shielded NO/NPN conn. M12
Inductive sensor M12 unshielded NO/NPN cable 2m axial
Inductive sensor M12 unshielded NO/NPN cable 2m axial
Inductive sensor M18 0-10 V+ 4-20 mA conn. M12 Sn 10 mm
Inductive sensor M18 short shielded NO/PNP conn. M12
Inductive sensor M8 shielded NO/PNP conn. M8
DETECTOR INDUCTIVO M8 1.5mm NA PNP CON.M12
DETECTOR INDUCTIVO M18 2H XS1M18MA230K
Inductive sensor M5 Sn 1,5 mm NO/PNP cable 2m axial
