Más en Variadores Frecuencia Anterior Siguiente

Variador de Frecuencia 2.2 Kmw

Entrada 3 x 400V

IVA no incluido



()

 

Supply voltage :   3×380 V (Three-phase)

Feeding Frequency : 47 Hz to 63 Hz

Control Mode : V/f control mode, Sensorless vector control mode, Torque control mode

Frequency range : V/f control: 0 Hz to 3000.0 Hz
                                            Vector control: 0 Hz to 300.00 Hz

Setting Resolution : Digital: 0.01 Hz, Analog: Maximum frequency / 2000

Overload Current Ratio: G model: 60% for 150s, 10% for 180s, 3% for 200s

                                             P pattern: 60% for 120s, 10% for 150s, 3% for 180s

Acceleration / Deceleration : 0.1 sec to 3600.0 sec

Starting Torque: 0.5% @ 150 Hz in vector control mode
                                            1% @ 150 Hz in V/f control mode

DC Braking : Yes

PID Function: Yes

Communication : RS-485 communication supporting standard MODBUS RTU protocol

Internal Brake : Internal brake chopper up to 30 kW

Digital Input : 6 PNP or NPN selectable digital inputs

Relay Output : 2 programmable relay outputs

Fast Pulse Introduction: 1 fast pulse input (Can also be used as digital input)

Fast Pulse Output : 1 fast pulse output (can also be used as a transistor output)

Analog Input : 1 x 4-20 mA or 0-10 V selectable analog input

Analog Output : 1 programmable 4-20 mA or 0-10 V selectable analog output

Operating temperature : -10°C to 50°C (If the ambient temperature is above 40°C, the carrier frequency should be below 2.0 kHz)

Storage Temperature : -20°C to 60°C

Moisture: Below 90% Rh, (without condensation)

Productos Relacionados

NUESTROS PRODUCTOS